Strait-Flex SB-100 Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Non Strait-Flex SB-100. Strait-Flex SB-100 Instructions / Assembly Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
New Concept Drywall Products
BIG
DESCRIPTION
(Speed,
Perfection and
Longevity)
Patented PVC tight fibered cotton composite corner tape that is 3” wide, .020” thick and
comes in 50’ and 100’ rolls.
Strait-Flex BIG is water resistant, rustproof and will not soften when wet. The material
will not fuzz up during sanding.
ADVANTAGES
Will not edge crack or dent like traditional nail on metal corner beads.
Easily folds to any inside or outside corner.
Holds a perfect straight line.
Will not sag or soften when large voids and fills are needed.
Material can be second coated immediately
Requires a very light fill-coat to finish product.
No nail pops or paint chipping.
Saves 25-50% on installation time.
Material will not fuzz up during sanding.
100 ft. roll ensure no waste or damage in transit or in rough site conditions.
Does not require fasteners, stapling, or any special tools
WARRANTY
Strait-Flex products are backed by a lifetime warranty. When applied to a sound
structure, built on a permanent foundation using recommended application techniques,
we warrant that these products will not edge-crack for the lifetime of the structure.
Contact Strait-Flex International Inc for complete details.
DIRECTIONS
Cut Big to desired length.
Fold in half at center crease, and then adjust to desired angle.
Apply using liberal coat of all-purpose compound to flat surface, corner or angle
with joint knife.
Place Big into wet compound, adjust if necessary to create a straight line and remove
excess compound. Adequate amount of compound is required behind Big to insure
bondability.
Apply a second coat of compound immediately. Lightly skim coat the entire surface
of Big and let dry.
Apply final coat if required, same as second coat and let dry. Sand lightly to smooth
surface.
Painted surface of Big must be thoroughly dry before applying second coat.
Do not use lightweight compounds for bed coat.
STORAGE
Store in dry place protected from moisture
Submittal Approvals:
Job Name:
Contractor:
Date:
Vue de la page 0
1

Résumé du contenu

Page 1 - New Concept Drywall Products

New Concept Drywall Products BIG DESCRIPTION (Speed, Perfection and Longevity) Patented PVC tight fibered cotton composite corner tape that is

Commentaires sur ces manuels

Pas de commentaire